Idea
In short
How do you build a PWM to voltage converter?
A Nano PWM pin and an RC filter make a smooth adjustable DC voltage, and you measure how the ripple falls as the capacitor gets larger. You need Arduino Nano, Resistor 10 kΩ, Resistor 1 kΩ, Ceramic capacitor 1 µF, Electrolytic capacitor 10 µF, Potentiometer 10 kΩ, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Turn a PWM signal into a steady voltage.
Parts list
- Development Boards
- Passives
- Passives
- Passives
- Passives
- Passives
- Tools & Instruments
- Prototyping
How to build it
- Send PWM at several duty cycles
- Add the RC filter
- Measure the average voltage
- Compare the ripple with two capacitors
- Load the output and see it sag
Common questions
What parts do I need for the PWM to voltage converter?
Arduino Nano, Resistor 10 kΩ, Resistor 1 kΩ, Ceramic capacitor 1 µF, Electrolytic capacitor 10 µF, Potentiometer 10 kΩ, Digital multimeter and Breadboard 830 Tie Points.
How long does the PWM to voltage converter take to build?
About 150 minutes for a intermediate maker.
