Projects / Ideas / E-paper weather card

E-paper weather card

AdvancedDisplaysIdeaReviewed
In short

How do you build an e-paper weather card?

A small e-paper card shows temperature, humidity and pressure and updates every ten minutes from sleep. You need ESP32 DevKit V1, 2.9 inch e-paper display, BME280 Environmental Sensor, Li-Po battery 3.7 V 1000 mAh and TP4056 module with protection (USB-C).

Level
Advanced
Time
About 330 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Combine sensors, e-paper and deep sleep.

How to build it

  1. Read the sensor
  2. Draw the numbers
  3. Refresh the display
  4. Deep sleep between updates
  5. Measure the battery life

Related projects

Common questions

What parts do I need for the e-paper weather card?

ESP32 DevKit V1, 2.9 inch e-paper display, BME280 Environmental Sensor, Li-Po battery 3.7 V 1000 mAh and TP4056 module with protection (USB-C).

How long does the e-paper weather card take to build?

About 330 minutes for a advanced maker.