Projects / Ideas / LED running armband

LED running armband

BeginnerWearablesIdeaReviewed
In short

How do you build an LED running armband?

A ring of LEDs on an armband flashes in a few patterns so drivers see you on a night run, and a button changes the pattern. You need Arduino Nano, WS2812B ring 16 LEDs, Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Beginner
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make a wearable safety flasher.

Parts list

How to build it

  1. Light the ring at a safe brightness
  2. Write a slow chase pattern
  3. Add a flash pattern
  4. Switch patterns with the button
  5. Power it from a small USB power bank

Related projects

Common questions

What parts do I need for the LED running armband?

Arduino Nano, WS2812B ring 16 LEDs, Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the LED running armband take to build?

About 120 minutes for a beginner maker.