Idea
In short
How do you build a pack voltage dashboard?
A small display shows the voltage and an estimated charge of a 3S pack with a low-voltage alarm. You need Arduino Nano, Voltage sensor module (0 to 25 V), Li-ion 18650 pack 3S 2P (11.1 V), BMS 3S 20 A (11.1 V Li-ion), SSD1306 OLED Display, Passive buzzer and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Estimate battery state of charge.
Parts list
- Development Boards
- Sensors
- Batteries
- Power
- Displays
- Motors & Actuators
- Prototyping
How to build it
- Measure pack voltage
- Map to a rough charge
- Show the bar
- Alarm at 3.3 V per cell
- Treat it as an estimate only
Common questions
What parts do I need for the pack voltage dashboard?
Arduino Nano, Voltage sensor module (0 to 25 V), Li-ion 18650 pack 3S 2P (11.1 V), BMS 3S 20 A (11.1 V Li-ion), SSD1306 OLED Display, Passive buzzer and Breadboard 830 Tie Points.
How long does the pack voltage dashboard take to build?
About 180 minutes for a intermediate maker.
