How do you build an earth and Moon orrery?
Two small stepper motors turn a model Earth around a lamp and a model Moon around the Earth at a true-to-scale ratio of about 13 moons for each year, so you can see the phases and why eclipses are rare. A slow, gentle model, with fingers kept clear of the arms. You need Arduino Nano, 28BYJ-48 Stepper Motor × 2, ULN2003 driver board × 2, LED 5 mm red, Resistor 220 Ω, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 100 min
- Parts
- 8
Show how the Moon circles the Earth in a year.
Parts list
- Development Boards
- Motors & Actuators
- Motor Drivers
- Semiconductors
- Passives
- Switches
- Prototyping
- Prototyping
How to build it
- Turn the Earth arm round the lamp
- Turn the Moon arm round the Earth
- Keep the ratio of about 13 to 1
- Stop at the new-moon position
- Add a button to speed up the show
Common questions
What parts do I need for the earth and Moon orrery?
Arduino Nano, 28BYJ-48 Stepper Motor × 2, ULN2003 driver board × 2, LED 5 mm red, Resistor 220 Ω, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the earth and Moon orrery take to build?
About 100 minutes for a intermediate maker.
