Idea
In short
How do you build a model semaphore signal?
A servo swings a signal arm between stop and go while a red and a green lamp follow it, as on an old railway. A button changes the signal. A model only, to show how a simple state machine controls a signal, never a real railway device. You need Arduino Nano, SG90 Micro Servo, LED 5 mm red, LED 5 mm green, Resistor 220 Ω × 2, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 70 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Swing a model signal arm with lamps.
Parts list
- Development Boards
- Motors & Actuators
- Semiconductors
- Semiconductors
- PassivesResistor 220 Ω × 2
- Switches
- Prototyping
- Prototyping
How to build it
- Fix a card arm to the servo
- Set stop and go angles
- Light the red or green lamp to match
- Change the signal with a button
- Slow the arm so it looks real
Related projects
Common questions
What parts do I need for the model semaphore signal?
Arduino Nano, SG90 Micro Servo, LED 5 mm red, LED 5 mm green, Resistor 220 Ω × 2, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the model semaphore signal take to build?
About 70 minutes for a beginner maker.
