Idea
In short
How do you build a reverse protection with a P-channel MOSFET?
A P-channel MOSFET protects a board from a reversed battery with almost no voltage loss, compared with a series diode. You need IRF4905 P-channel MOSFET, Zener diode 5.1 V (1N4733A), Resistor 10 kΩ, Resistor 1 kΩ, 9 V battery, 9 V battery snap with DC jack, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Protect from reverse polarity cheaply.
Parts list
- Semiconductors
- Semiconductors
- Passives
- Passives
- Batteries
- Power
- Tools & Instruments
- Prototyping
How to build it
- Draw the MOSFET in the supply line
- Add the gate resistor and Zener
- Connect the battery correctly
- Measure the drop
- Try it reversed with a meter only
Common questions
What parts do I need for the reverse protection with a P-channel MOSFET?
IRF4905 P-channel MOSFET, Zener diode 5.1 V (1N4733A), Resistor 10 kΩ, Resistor 1 kΩ, 9 V battery, 9 V battery snap with DC jack, Digital multimeter and Breadboard 830 Tie Points.
How long does the reverse protection with a P-channel MOSFET take to build?
About 150 minutes for a intermediate maker.
