Projects / Ideas / High-temperature thermocouple logger

High-temperature thermocouple logger

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a high-temperature thermocouple logger?

A K-type thermocouple amplifier logs temperatures far above what ordinary sensors can read, for a soldering iron tip or a candle flame test. You need Arduino Nano, MAX6675 thermocouple module with K-type probe, SSD1306 OLED Display, MicroSD Card Module, DS3231 RTC module and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure and log high temperatures safely at a distance.

How to build it

  1. Read the thermocouple over SPI
  2. Show the temperature
  3. Log with timestamps
  4. Add a peak hold
  5. Draw a heat-up curve in a spreadsheet

Related projects

Common questions

What parts do I need for the high-temperature thermocouple logger?

Arduino Nano, MAX6675 thermocouple module with K-type probe, SSD1306 OLED Display, MicroSD Card Module, DS3231 RTC module and Breadboard 830 Tie Points.

How long does the high-temperature thermocouple logger take to build?

About 210 minutes for a intermediate maker.