Idea
In short
How do you build a crystal frequency tester?
A microcontroller counts the output of a crystal oscillator to compare 8, 12 and 16 MHz parts. You need Arduino Nano, Crystal oscillator 16 MHz (HC-49), Ceramic capacitor 22 pF × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure frequency accurately.
Parts list
- Development Boards
- Passives
- Passives
- Displays
- Prototyping
How to build it
- Build a small oscillator
- Count pulses over a gate time
- Show the frequency
- Compare crystals
- Note the temperature effect
Common questions
What parts do I need for the crystal frequency tester?
Arduino Nano, Crystal oscillator 16 MHz (HC-49), Ceramic capacitor 22 pF × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the crystal frequency tester take to build?
About 240 minutes for a intermediate maker.
