Components / Crystals, fuses and other passives / Crystal oscillator 16 MHz (HC-49)

Crystal oscillator 16 MHz (HC-49)

Quartz crystal for an ATmega328P on your own board. Needs two 22 pF capacitors.

Value16.000 MHz
Tolerance±20 to ±30 ppm
Power ratingLoad capacitance about 18 to 20 pF
PackageHC-49S through-hole
PassivesReviewedMPN HC-49S 16MHzUsed in 2 projects
16.000
In short

What is the Crystal oscillator 16 MHz (HC-49) and what is it used for?

Quartz crystal for an ATmega328P on your own board. Needs two 22 pF capacitors. Makers use it for bare ATmega Arduino builds.

How it works

A quartz slice vibrates at a precise frequency when the chip's oscillator drives it.

Key specifications

Passive component specValue
Value16.000 MHz
Tolerance±20 to ±30 ppm
Power ratingLoad capacitance about 18 to 20 pF
PackageHC-49S through-hole
Marking16.000

Pinout

Two leadsNo polarity

How to use it

For an ATmega328P on a breadboard, connect it to pins 9 and 10 with a 22 pF capacitor from each pin to GND, and keep the leads short.

Applications

Alternatives

Buy at

Common questions

What is the Crystal oscillator 16 MHz (HC-49) used for?

In maker projects: bare ATmega Arduino builds.

How does the Crystal oscillator 16 MHz (HC-49) work?

A quartz slice vibrates at a precise frequency when the chip's oscillator drives it.

What can I use instead of the Crystal oscillator 16 MHz (HC-49)?

Ceramic resonator 16 MHz (3-pin) and Ceramic capacitor 22 pF.