Projects / Ideas / Gesture wand for presentations

Gesture wand for presentations

AdvancedGames & ToysIdeaReviewed
In short

How do you build a gesture wand for presentations?

A wand with an IMU recognises a flick left or right to change slides over Bluetooth. You need ESP32 DevKit V1, BMI160 6-axis IMU, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.

Level
Advanced
Time
About 330 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Recognise a simple gesture.

How to build it

  1. Read the IMU
  2. Detect a flick with a threshold
  3. Send arrow keys over Bluetooth
  4. Add a cooldown
  5. Tune for your hand

Related projects

Common questions

What parts do I need for the gesture wand for presentations?

ESP32 DevKit V1, BMI160 6-axis IMU, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.

How long does the gesture wand for presentations take to build?

About 330 minutes for a advanced maker.