Idea
In short
How do you build a handheld game console?
An ESP32 with a colour TFT, buttons and a battery runs simple games and classic emulators in a printed case. You need ESP32 DevKit V1, 2.4 inch TFT shield for Arduino Uno, Tactile push button 6 mm × 8, Passive buzzer, Li-Po battery 3.7 V 2000 mAh, TP4056 module with protection (USB-C), MT3608 Boost Module and Slide switch SPDT (SS12D00).
- Level
- Advanced
- Time
- About 600 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a complete handheld with display, input, sound and power.
Parts list
- Development Boards
- DisplaysOr an ILI9341 SPI module
- Switches
- Motors & Actuators
- Batteries
- Power
- Power
- Switches
How to build it
- Wire the TFT over SPI
- Lay out a D-pad and A, B, start and select buttons
- Write a game loop with a fixed frame rate
- Add sound with the buzzer
- Charge over USB and switch off cleanly
Common questions
What parts do I need for the handheld game console?
ESP32 DevKit V1, 2.4 inch TFT shield for Arduino Uno, Tactile push button 6 mm × 8, Passive buzzer, Li-Po battery 3.7 V 2000 mAh, TP4056 module with protection (USB-C), MT3608 Boost Module and Slide switch SPDT (SS12D00). 2.4 inch TFT shield for Arduino Uno: Or an ILI9341 SPI module.
How long does the handheld game console take to build?
About 600 minutes for a advanced maker.
