Idea
In short
How do you build a light sabre toy with motion sound?
An LED strip in a tube lights up with a hum, and swings and hits play sounds detected by an IMU. You need Arduino Nano, MPU6050 IMU, WS2812B strip 5 m (30 LEDs/m), DFPlayer Mini MP3 module, Speaker 8 Ω 0.5 W, SanDisk microSD card 32 GB (A1, Class 10), 18650 Li-ion cell, Battery holder 18650 single and TP4056 module with protection (USB-C).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Map motion to sound and light effects.
Parts list
- Development Boards
- Sensors
- Optoelectronics
- Interfaces
- Motors & Actuators
- SBC Accessories
- Power
- Power
- Power
How to build it
- Ignite the strip from bottom to top
- Play a hum loop
- Detect swings from the gyro
- Detect hits as sharp jerks
- Pick colour with a button
Common questions
What parts do I need for the light sabre toy with motion sound?
Arduino Nano, MPU6050 IMU, WS2812B strip 5 m (30 LEDs/m), DFPlayer Mini MP3 module, Speaker 8 Ω 0.5 W, SanDisk microSD card 32 GB (A1, Class 10), 18650 Li-ion cell, Battery holder 18650 single and TP4056 module with protection (USB-C). WS2812B strip 5 m (30 LEDs/m): Cut 1 m.
How long does the light sabre toy with motion sound take to build?
About 240 minutes for a intermediate maker.
