BME680 gas, pressure, humidity and temperature sensor
BME280 plus a metal-oxide gas sensor that gives an air quality index.
What is the BME680 gas, pressure, humidity and temperature sensor and what is it used for?
BME280 plus a metal-oxide gas sensor that gives an air quality index. Makers use it for indoor air quality stations.
A BME280-style sensor plus a tiny heated metal-oxide gas sensor whose resistance falls with VOCs.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Temperature, humidity, pressure and VOC gas resistance |
| Interface | I2C or SPI |
| I2C address | 0x76 or 0x77 |
| Supply voltage | 1.71 to 3.6 V |
Pinout
How to use it
Use the Adafruit BME680 library for temperature, humidity, pressure and raw gas resistance, or Bosch's BSEC library for an indoor air quality index. The gas reading needs days of burn-in to settle.
Applications
Alternatives
- BME280 Environmental SensorWithout gas sensing, cheaper
- SGP40 VOC sensorDedicated VOC index sensor
Common questions
What is the BME680 gas, pressure, humidity and temperature sensor used for?
In maker projects: indoor air quality stations.
How does the BME680 gas, pressure, humidity and temperature sensor work?
A BME280-style sensor plus a tiny heated metal-oxide gas sensor whose resistance falls with VOCs.
What voltage does the BME680 gas, pressure, humidity and temperature sensor need?
1.71 to 3.6 V.
How do I connect the BME680 gas, pressure, humidity and temperature sensor to an Arduino or ESP32?
I2C or SPI. Pins: VCC (3.3 V (some modules accept 5 V)), GND (Ground), SCL (I2C clock or SPI SCK), SDA (I2C data or SPI SDI), SDO (Address 0x76 or 0x77), CS (Chip select, high for I2C).
What can I use instead of the BME680 gas, pressure, humidity and temperature sensor?
BME280 Environmental Sensor and SGP40 VOC sensor.
