Projects / Ideas / Transistor curve tracer

Transistor curve tracer

IntermediateLearningIdeaReviewed
In short

How do you build a transistor curve tracer?

An Arduino steps the base current and collector voltage of a transistor and plots its output curves. You need Arduino Uno R3, NPN Transistor 2N2222, Resistor 10 kΩ, Resistor 1 kΩ, Resistor 220 Ω, MCP4725 12-bit DAC module and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Plot a transistor's family of curves.

Parts list

How to build it

  1. Set several base currents
  2. Sweep the collector voltage
  3. Measure collector current
  4. Plot the family
  5. Estimate the gain

Related projects

Common questions

What parts do I need for the transistor curve tracer?

Arduino Uno R3, NPN Transistor 2N2222, Resistor 10 kΩ, Resistor 1 kΩ, Resistor 220 Ω, MCP4725 12-bit DAC module and Breadboard 830 Tie Points.

How long does the transistor curve tracer take to build?

About 270 minutes for a intermediate maker.