Projects / Ideas / LED I-V curve tracer

LED I-V curve tracer

IntermediateLearningIdeaReviewed
In short

How do you build an LED I-V curve tracer?

A DAC and current monitor sweep an LED's voltage and plot its characteristic curve. You need Arduino Uno R3, MCP4725 12-bit DAC module, INA219 Current Monitor, LED 5 mm red, Resistor 330 Ω and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Trace a diode curve automatically.

Parts list

How to build it

  1. Set a DAC sweep
  2. Read voltage and current
  3. Plot the curve
  4. Compare colours
  5. Find the turn-on voltage

Related projects

Common questions

What parts do I need for the LED I-V curve tracer?

Arduino Uno R3, MCP4725 12-bit DAC module, INA219 Current Monitor, LED 5 mm red, Resistor 330 Ω and Breadboard 830 Tie Points.

How long does the LED I-V curve tracer take to build?

About 210 minutes for a intermediate maker.