How do you build a big yes and no talking buttons?
Two large buttons say yes or no in a recorded voice when pressed, with a green or red light, so someone who finds speaking hard can answer questions. Record the words in a voice they like. A simple tool that shows how a good project can help. You need Arduino Nano, DFPlayer Mini MP3 module, Speaker 8 Ω 0.5 W, Tactile push button 6 mm × 2, LED 5 mm green, LED 5 mm red, Resistor 220 Ω × 2, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 80 min
- Parts
- 9
Answer yes or no with big talking buttons.
Parts list
- Development Boards
- Interfaces
- Motors & Actuators
- Switches
- Semiconductors
- Semiconductors
- PassivesResistor 220 Ω × 2
- Prototyping
- Prototyping
How to build it
- Record yes and no in a friendly voice
- Wire the player module to the Nano
- Play yes or no from the buttons
- Light the matching colour
- Make the buttons large with card and foil
Common questions
What parts do I need for the big yes and no talking buttons?
Arduino Nano, DFPlayer Mini MP3 module, Speaker 8 Ω 0.5 W, Tactile push button 6 mm × 2, LED 5 mm green, LED 5 mm red, Resistor 220 Ω × 2, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the big yes and no talking buttons take to build?
About 80 minutes for a beginner maker.
