Idea
In short
How do you build a hot-wire anemometer?
A heated thermistor cooled by wind measures air speed without moving parts. You need Arduino Nano, NTC thermistor 10 kΩ (B3950) × 2, MOSFET IRLZ44N, Resistor 10 kΩ, Resistor 100 Ω and ADS1115 16-bit ADC module.
- Level
- Advanced
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use heat loss to measure airflow.
Parts list
- Development Boards
- Sensors
- Semiconductors
- Passives
- Passives
- Sensors
How to build it
- Heat one thermistor with a known current
- Keep the other at air temperature
- Measure the difference
- Calibrate against a fan and a known speed
- Plot speed against voltage
Common questions
What parts do I need for the hot-wire anemometer?
Arduino Nano, NTC thermistor 10 kΩ (B3950) × 2, MOSFET IRLZ44N, Resistor 10 kΩ, Resistor 100 Ω and ADS1115 16-bit ADC module.
How long does the hot-wire anemometer take to build?
About 240 minutes for a advanced maker.
