Projects / Ideas / Magnetic angle dial

Magnetic angle dial

IntermediateSensorsIdeaReviewed
In short

How do you build a magnetic angle dial?

A magnet on a knob turns, and a magnetic encoder reports its exact angle with no contact. You need Arduino Nano, AS5600 magnetic angle encoder, Neodymium magnets (10 × 3 mm), SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Read a magnetic angle sensor.

How to build it

  1. Mount the magnet above the sensor
  2. Read the angle over I2C
  3. Show degrees
  4. Add a zero button
  5. Detect turns

Related projects

Common questions

What parts do I need for the magnetic angle dial?

Arduino Nano, AS5600 magnetic angle encoder, Neodymium magnets (10 × 3 mm), SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the magnetic angle dial take to build?

About 210 minutes for a intermediate maker.