Idea
In short
How do you build a slow photography turntable?
A stepper driver turns a small plate a few degrees at a time, useful for photographing a model from every side. You need Arduino Uno R3, A4988 stepper driver, 28BYJ-48 Stepper Motor, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Turn a plate in exact steps.
Parts list
- Development Boards
- Motor Drivers
- Motors & Actuators
- Switches
- Prototyping
How to build it
- Wire the driver and set the current
- Step in one direction
- Set degrees per step
- Add a start button
- Pause for a photo at each stop
Common questions
What parts do I need for the slow photography turntable?
Arduino Uno R3, A4988 stepper driver, 28BYJ-48 Stepper Motor, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the slow photography turntable take to build?
About 270 minutes for a intermediate maker.
