Lab / Virtual lab / Op-amps, timers and oscillators

RC phase-shift oscillator

Check f = 1/(2πRC√6) and the gain of 29 the amplifier needs.

Op-amps, timers and oscillatorsSimulatedFull experiment write-up →

Circuit

Updates as you change values
+−VO3 × RC: R 10 kΩ, C 10 nFGain 30650 Hz

A 741 inverting amplifier with three equal RC sections in the feedback path; read the output on the CRO.

Controls

Changing any setting except r starts a new set of readings.

Meters

Frequency650 Hz
Output (p-p)14 V

Graph

0 readings

Your graph appears here

Take readings, or press Auto sweep to log a full set.

your readings

Theory

  • f = 1 / (2π R C √6) for three equal sections
  • Each section shifts about 60°; the three give 180°
  • The inverting amplifier adds 180°, so the loop is 360°
  • The network attenuates by 1/29 at f, so |A| = Rf / R ≥ 29
  • R of the amplifier input is also the last section's R

Worked out for your values

Oscillation frequency
649.7 Hz
Network attenuation β
1/29
Loop gain A β
1.034
Rf for gain 29 with R
290 kΩ

Your result

Worked out from your readings and compared with theory.

C from f against 1/R

Take two or more readings at different R.

Sources of error

  • Loading between RC sections if R is not much larger than the op-amp output resistance
  • Component mismatch between sections
  • Distortion when the gain is set well above 29