Verification of the maximum power transfer theorem
To verify that a source delivers maximum power to the load when the load resistance equals the source's internal (Thevenin) resistance.
Theory
A source of EMF V with internal resistance Rs delivers P = V²·RL / (Rs + RL)² to a load RL. P is largest when RL = Rs, and then Pmax = V² / 4Rs. Efficiency at that point is only 50%.
Apparatus
- DC supply
- Resistor Rs (1 kΩ) as the source resistance
- Decade resistance box (load)
- Multimeter
Circuit connections
- Supply → Rs → load RL → back to supply; voltmeter across RL
Procedure
Pre-lab check
4 questions · 75% to be readyTry the readings before the lab
| RL (Ω) | VL (V) | IL (mA) | P (mW) | Efficiency (%) |
|---|---|---|---|---|
| 100 | 0.91 | 9.091 | 8.26 | 9.1 |
| 250 | 2 | 8 | 16 | 20 |
| 500 | 3.33 | 6.667 | 22.22 | 33.3 |
| 750 | 4.29 | 5.714 | 24.49 | 42.9 |
| 1000 | 5 | 5 | 25 | 50 |
| 1500 | 6 | 4 | 24 | 60 |
| 2000 | 6.67 | 3.333 | 22.22 | 66.7 |
| 3000 | 7.5 | 2.5 | 18.75 | 75 |
| 5000 | 8.33 | 1.667 | 13.89 | 83.3 |
Precautions
- Check the resistor power ratings at the peak.
- Take readings closely around RL = Rs.
My readings
Type what you measured. It goes into your record book, and to My Garage when you are signed in.
| S. No. | RL (Ω) | VL (V) | IL (mA) | P (mW) | Efficiency (%) |
|---|---|---|---|---|---|
| 1 | |||||
| 2 | |||||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 |
Check my readings
Put the value you set in the first column, then compare. Real parts have tolerance.
Your lab record
Everything above is free. The print-ready write-up comes with Maker.
Printed pages leave the observation table empty for your own readings.
Viva practice
Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.
Quick answers for your record and viva
What is the aim of the verification of the maximum power transfer theorem experiment?
To verify that a source delivers maximum power to the load when the load resistance equals the source's internal (Thevenin) resistance.
What apparatus is needed for verification of the maximum power transfer theorem?
DC supply, Resistor Rs (1 kΩ) as the source resistance, Decade resistance box (load), Multimeter.
What is the theory behind verification of the maximum power transfer theorem?
A source of EMF V with internal resistance Rs delivers P = V²·RL / (Rs + RL)² to a load RL. P is largest when RL = Rs, and then Pmax = V² / 4Rs. Efficiency at that point is only 50%.
What result should I get in verification of the maximum power transfer theorem?
Power is maximum (___ mW) at RL = ___ Ω, which equals Rs. The theorem is verified.
What precautions should I take in verification of the maximum power transfer theorem?
Check the resistor power ratings at the peak. Take readings closely around RL = Rs.
