Lab / Virtual lab / DC circuits
Wheatstone bridge
Find the unknown resistance by balancing a bridge, and see the output voltage cross zero.
DC circuitsSimulated
Circuit
Updates as you change valuesA 5 V supply across a bridge: R1 = R2 = 1 kΩ on one side, a fixed R3 and the unknown Rx on the other; read the voltage between the arms.
Controls
Changing any setting except unknown rx starts a new set of readings.
Meters
Bridge output-500 mV
Graph
0 readingsYour graph appears here
Take readings, or press Auto sweep to log a full set.
your readings
Theory
- Balance (VG = 0) when R1 / R2 = R3 / Rx, so Rx = R3 × R2 / R1
- VG = V (R2 / (R1 + R2) − Rx / (R3 + Rx))
- Near balance, VG ≈ −(V/4) × ΔR / R: about 1.25 mV per 0.1 % at 5 V
- Most sensitive when all four arms are equal
Worked out for your values
- Rx at balance
- 1 kΩ
- Bridge output now
- -500 mV
- Sensitivity near balance
- 1.25 mV/Ω
Your result
Worked out from your readings and compared with theory.
Rx where VG crosses zero
Take readings on both sides of zero output.
Sources of error
- Tolerance of the ratio arms R1 and R2
- Thermal EMF at junctions at very low output
- Galvanometer or meter resolution near balance
