Lab / Virtual lab / DC circuits

Thevenin's and Norton's theorems

Measure the load voltage and current for several loads and find the Thevenin and Norton equivalents from the line.

DC circuitsSimulatedFull experiment write-up →

Circuit

Updates as you change values
10 VR1 1 kΩR22.2 kΩR3 470 ΩARL1 kΩV

A 10 V source feeding R1 and R2 as a divider, then R3 in series to a variable load RL; read the load voltage and current.

Controls

Changing any setting except load rl starts a new set of readings.

Meters

Load current3.19 mA
Load voltage3.19 V

Graph

0 readings

Your graph appears here

Take readings, or press Auto sweep to log a full set.

your readings

Theory

  • VTh = V R2 / (R1 + R2): the open-circuit voltage
  • RTh = (R1 ‖ R2) + R3: short the source, look back from the load
  • IN = VTh / RTh: the short-circuit current, RN = RTh
  • IL = VTh / (RTh + RL), so VL = VTh − IL RTh is a straight line

Worked out for your values

VTh
6.875 V
RTh = RN
1.158 kΩ
Norton current IN
5.94 mA
Load current now
3.187 mA

Your result

Worked out from your readings and compared with theory.

VTh (VL-axis intercept)

Take two or more readings at different loads.

RTh (−slope of VL against IL)

Take two or more readings at different loads.

IN (IL-axis intercept)

Take two or more readings at different loads.

Sources of error

  • Ammeter burden voltage adds to RTh
  • Resistor tolerance
  • Reading VL and IL at slightly different times if the supply drifts