Verification of Thevenin's and Norton's theorems
To find the Thevenin and Norton equivalents of a network and verify that they give the same load current.
- DC supply
- Resistors (R1 1 kΩ, R2 2.2 kΩ, R3 470 Ω)
- Decade resistance box as the load
- Multimeter
Theory
Any linear two-terminal network can be replaced by a voltage source Vth in series with Rth (Thevenin), or a current source IN = Vth / Rth in parallel with Rth (Norton). Vth is the open-circuit voltage at the terminals; Rth is the resistance seen with sources replaced by their internal resistance. For this network: Vth = V·R2/(R1+R2) and Rth = R1‖R2 + R3.
Read the lesson: Resistor networks ›- Supply → R1 → node A; R2 from A to ground; A → R3 → load terminals; load RL across the terminals
Procedure
Pre-lab check
4 questions · 75% to be readyTry the readings before the lab
| RL (Ω) | IL original (mA) | IL Thevenin (mA) | VL (V) |
|---|---|---|---|
| 100 | 5.467 | 5.467 | 0.55 |
| 470 | 4.224 | 4.224 | 1.99 |
| 1000 | 3.187 | 3.187 | 3.19 |
| 2200 | 2.048 | 2.048 | 4.5 |
| 4700 | 1.174 | 1.174 | 5.52 |
Precautions
- Remove the supply before measuring Rth; never measure resistance in a live circuit.
- Use the same RL for both measurements.
My readings
Type what you measured. It goes into your record book, and to My Garage when you are signed in.
| S. No. | RL (Ω) | IL original (mA) | IL Thevenin (mA) | VL (V) |
|---|---|---|---|---|
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 4 | ||||
| 5 | ||||
| 6 |
Check my readings
Put the value you set in the first column, then compare. Real parts have tolerance.
Vth = ___ V, Rth = ___ Ω, IN = ___ mA. The load current from the equivalent circuit equals the original, so both theorems are verified.
Everything above is free. The print-ready write-up comes with Maker.
Printed pages leave the observation table empty for your own readings.
Viva questions
Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.
Quick answers for your record and viva
What is the aim of the verification of thevenin's and norton's theorems experiment?
To find the Thevenin and Norton equivalents of a network and verify that they give the same load current.
What apparatus is needed for verification of thevenin's and norton's theorems?
DC supply, Resistors (R1 1 kΩ, R2 2.2 kΩ, R3 470 Ω), Decade resistance box as the load, Multimeter.
What is the theory behind verification of thevenin's and norton's theorems?
Any linear two-terminal network can be replaced by a voltage source Vth in series with Rth (Thevenin), or a current source IN = Vth / Rth in parallel with Rth (Norton). Vth is the open-circuit voltage at the terminals; Rth is the resistance seen with sources replaced by their internal resistance. For this network: Vth = V·R2/(R1+R2) and Rth = R1‖R2 + R3.
What result should I get in verification of thevenin's and norton's theorems?
Vth = ___ V, Rth = ___ Ω, IN = ___ mA. The load current from the equivalent circuit equals the original, so both theorems are verified.
What precautions should I take in verification of thevenin's and norton's theorems?
Remove the supply before measuring Rth; never measure resistance in a live circuit. Use the same RL for both measurements.
