How to add resistors in series and in parallel
In series resistors add. In parallel the total is smaller than either. Here is the working with your numbers.
Rseries = R1+R2; Rparallel = 1/(1/R1+1/R2)
Result
- Equivalent
- 3.2 kΩ
- Connection
- series
Step by step
The working with your numbers
- Series: add them
R = R1 + R2 = 1 kΩ + 2.2 kΩ = 3.2 kΩ - Share of the voltage
R1 drops 31.3 % and R2 drops 68.8 %The bigger resistor takes more of the voltage.
Does the answer make sense?
- OK: Check: 3.2 kΩ is bigger than either. Series is always larger than the largest.
Pick a real part
- Nearest E24 value to 3.2 kΩ: 3.3 kΩ. If you need another value, the standard value finder gives the best pair.
- Tolerance does not add up: two 5 % resistors give a total within 5 %.
Common mistakes
- Using the series formula for a parallel circuit.
- Adding the two values directly for parallel. The answer would be larger than either.
- Forgetting that parallel resistors share the power too, which lets two ¼ W parts act as ½ W.
Learn it, try it, build it
Calculated, not measured. Check the exact part datasheet and your real circuit before powering anything.
Just need the number? Use the series / parallel resistors calculator on Geekobot.
Common questions
How do you work out two resistors in parallel?
R = R1 × R2 ÷ (R1 + R2). 1 kΩ and 2.2 kΩ in parallel give 2.2 ÷ 3.2 = 688 Ω.
Why is the parallel total smaller than each resistor?
Each extra path gives the current another way through, so the total opposition falls. The total is always less than the smallest resistor.
