Touch sensor module (TTP223)
Capacitive touch pad that works like a button through thin plastic.
What is the Touch sensor module (TTP223) and what is it used for?
Capacitive touch pad that works like a button through thin plastic. Makers use it for touch lamps, hidden switches.
The TTP223 chip measures the capacitance of the pad, which rises when a finger comes near.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Touch (capacitive) |
| Interface | Digital out, toggle or momentary set by jumpers |
| Supply voltage | 2 to 5.5 V |
Pinout
How to use it
Read I/O like a button with no pull-up needed. Solder the A jumper to make the output active-low and the B jumper to make it toggle on each touch. It also works through a thin sheet of plastic or glass.
Applications
Builds that use it
Speedcube stack timer
Electronic Ludo dice
Touch-dimming reading lamp
Desk robot with expressive eyes
Three-step touch lamp
Pico touch dimmer lamp
Touch light switch for a desk lamp
Touch-sensitive glow wand
Alternatives
- MPR121 capacitive touch sensor12 touch inputs on I2C
- Capacitive touch keypad (TTP229, 16 key)16-key touch keypad
Common questions
What is the Touch sensor module (TTP223) used for?
In maker projects: touch lamps, hidden switches.
How does the Touch sensor module (TTP223) work?
The TTP223 chip measures the capacitance of the pad, which rises when a finger comes near.
What voltage does the Touch sensor module (TTP223) need?
2 to 5.5 V.
How do I connect the Touch sensor module (TTP223) to an Arduino or ESP32?
Digital out, toggle or momentary set by jumpers. Pins: VCC (2 to 5.5 V), I/O (Digital output, HIGH when touched by default), GND (Ground).
What can I use instead of the Touch sensor module (TTP223)?
MPR121 capacitive touch sensor and Capacitive touch keypad (TTP229, 16 key).
