Idea
In short
How do you build a touch light switch for a desk lamp?
A capacitive touch pad toggles a 12 V LED strip and long-press dims it, with no moving parts. You need Arduino Nano, Touch sensor module (TTP223), 12 V LED strip warm white (5 m, 2835), MOSFET IRLZ44N and 12 V 2 A DC adapter.
- Level
- Beginner
- Time
- About 90 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a touch sensor to toggle and dim a light.
Parts list
- Development Boards
- Sensors
- Optoelectronics
- Semiconductors
- Power
How to build it
- Read the touch pin
- Detect short and long press
- Toggle on a short press
- Ramp brightness on a long press
- Remember the level after a power cut
Common questions
What parts do I need for the touch light switch for a desk lamp?
Arduino Nano, Touch sensor module (TTP223), 12 V LED strip warm white (5 m, 2835), MOSFET IRLZ44N and 12 V 2 A DC adapter.
How long does the touch light switch for a desk lamp take to build?
About 90 minutes for a beginner maker.
