Capacitive touch keypad (TTP229, 16 key)
Sixteen touch keys on one board.
MeasuresTouch on 16 keys
InterfaceTwo-wire serial
Supply voltage2.4 to 5.5 V
SensorsReviewedMPN TTP229Used in 3 projects
In short
What is the Capacitive touch keypad (TTP229, 16 key) and what is it used for?
Sixteen touch keys on one board. Makers use it for touch keypads.
How it works
A capacitive touch controller scans each pad for the capacitance change of a finger.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Touch on 16 keys |
| Interface | Two-wire serial |
| Supply voltage | 2.4 to 5.5 V |
Pinout
VCC2.4 to 5.5 V
GNDGround
SCLClock from your board
SDOSerial data out
How to use it
Short the jumper pads TP2 (and TP3 on some boards) to enable all 16 keys. Clock out 16 bits to read the key states. It is not I2C despite the pin names.
Applications
Touch keypads
Builds that use it
Alternatives
- MPR121 capacitive touch sensor12 electrodes on real I2C
- Touch sensor module (TTP223)One touch button
Common questions
What is the Capacitive touch keypad (TTP229, 16 key) used for?
In maker projects: touch keypads.
How does the Capacitive touch keypad (TTP229, 16 key) work?
A capacitive touch controller scans each pad for the capacitance change of a finger.
What voltage does the Capacitive touch keypad (TTP229, 16 key) need?
2.4 to 5.5 V.
How do I connect the Capacitive touch keypad (TTP229, 16 key) to an Arduino or ESP32?
Two-wire serial. Pins: VCC (2.4 to 5.5 V), GND (Ground), SCL (Clock from your board), SDO (Serial data out).
What can I use instead of the Capacitive touch keypad (TTP229, 16 key)?
MPR121 capacitive touch sensor and Touch sensor module (TTP223).
