MPR121 capacitive touch sensor
Twelve touch inputs over I2C, also works with fruit and foil.
What is the MPR121 capacitive touch sensor and what is it used for?
Twelve touch inputs over I2C, also works with fruit and foil. Makers use it for touch pianos, interactive art.
It measures the charge time of each electrode, which rises when a finger adds capacitance.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Touch on 12 electrodes |
| Interface | I2C |
| I2C address | 0x5A to 0x5D |
| Supply voltage | 1.71 to 3.6 V |
Pinout
How to use it
Use the Adafruit MPR121 library. Connect wires, copper tape or fruit to the electrodes. Keep electrode wires short and apart, and recalibrate after changing the setup.
Applications
Builds that use it
Alternatives
- Touch sensor module (TTP223)Single touch button
Common questions
What is the MPR121 capacitive touch sensor used for?
In maker projects: touch pianos, interactive art.
How does the MPR121 capacitive touch sensor work?
It measures the charge time of each electrode, which rises when a finger adds capacitance.
What voltage does the MPR121 capacitive touch sensor need?
1.71 to 3.6 V.
How do I connect the MPR121 capacitive touch sensor to an Arduino or ESP32?
I2C. Pins: 3.3V (Supply), IRQ (Interrupt, LOW on touch change), SCL (I2C clock), SDA (I2C data), ADDR (Address select 0x5A to 0x5D), GND (Ground).
What can I use instead of the MPR121 capacitive touch sensor?
Touch sensor module (TTP223).
