Solid state relay SSR-40DA
Switches AC loads silently from a 3 to 32 V signal.
Colour / typeSSR, DC control to AC load, zero-cross
Contact rating40 A label, about 10 to 15 A realistic, 24 to 380 V AC
PackagePanel with heatsink
PolarityInput + and − marked
SwitchesReviewedMPN SSR-40DAUsed in 4 projects
In short
What is the Solid state relay SSR-40DA and what is it used for?
Switches AC loads silently from a 3 to 32 V signal. Makers use it for heaters, lamps.
Fake SSRs are common; derate heavily and use a heatsink
How it works
An optotriac drives a power triac that switches at the AC zero crossing.
Key specifications
| LED and switch spec | Value |
|---|---|
| Colour / type | SSR, DC control to AC load, zero-cross |
| Contact rating | 40 A label, about 10 to 15 A realistic, 24 to 380 V AC |
| Package | Panel with heatsink |
| Polarity | Input + and − marked |
Pinout
3(+) 4 (-)3 to 32 V DC control
12AC load terminals
How to use it
AC loads only. Bolt it to a heatsink, fuse the load and treat the 40 A label as about 10 to 15 A, since many units are not genuine. Have mains wiring done by a qualified electrician.
Applications
Heaterslamps
Builds that use it
Alternatives
- Contactor 230 V coil 25 AHeavy motor loads
Common questions
What is the Solid state relay SSR-40DA used for?
In maker projects: heaters, lamps.
How does the Solid state relay SSR-40DA work?
An optotriac drives a power triac that switches at the AC zero crossing.
What can I use instead of the Solid state relay SSR-40DA?
Solid state relay module 2-channel (G3MB-202P) and Contactor 230 V coil 25 A.
