Idea
In short
How do you build a reflow oven controller?
A thermocouple and SSR control a toaster oven to follow a solder reflow profile. You need Arduino Nano, MAX31855 thermocouple amplifier, Solid state relay SSR-40DA, SSD1306 OLED Display, Tactile push button 6 mm × 2 and Active buzzer 5 V.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Follow a temperature profile with PID.
Parts list
- Development Boards
- Sensors
- Switches
- Displays
- Switches
- Motors & Actuators
How to build it
- Read oven temperature
- Follow preheat, soak, reflow and cool stages
- Switch the heater with the SSR using PID
- Beep at each stage
- Have a qualified electrician wire the mains side in a closed box
Common questions
What parts do I need for the reflow oven controller?
Arduino Nano, MAX31855 thermocouple amplifier, Solid state relay SSR-40DA, SSD1306 OLED Display, Tactile push button 6 mm × 2 and Active buzzer 5 V.
How long does the reflow oven controller take to build?
About 360 minutes for a advanced maker.
