Solid state relay module 2-channel (G3MB-202P)
Two small SSRs for silent switching of AC loads.
Function2 × SSR, AC loads only
Supply voltage5 V
Rating2 A 240 V AC per channel
Logic level5 V
InterfacesReviewedMPN 2CH SSR moduleUsed in 2 projects
In short
What is the Solid state relay module 2-channel (G3MB-202P) and what is it used for?
Two small SSRs for silent switching of AC loads. Makers use it for lights and small AC loads.
AC only: it won't turn off DC loads
How it works
An optotriac with zero-cross detection drives a triac, switching silently at the AC zero point.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | 2 × SSR, AC loads only |
| Supply voltage | 5 V |
| Rating | 2 A 240 V AC per channel |
| Logic level | 5 V |
Pinout
DC+ DC-5 V
CH1 CH2Inputs (low or high trigger, check the board)
SW1 SW2Output terminals (AC load in series)
How to use it
It switches AC loads only, up to 2 A, and cannot switch DC. A small leakage current can make LED bulbs glow when off. Fuse each channel.
Applications
Lights and small AC loads
Builds that use it
Alternatives
- Solid state relay SSR-40DAHigher current
- Relay module 2-channel 5 VSwitches AC or DC
Common questions
What is the Solid state relay module 2-channel (G3MB-202P) used for?
In maker projects: lights and small AC loads.
How does the Solid state relay module 2-channel (G3MB-202P) work?
An optotriac with zero-cross detection drives a triac, switching silently at the AC zero point.
What voltage does the Solid state relay module 2-channel (G3MB-202P) need?
5 V.
What can I use instead of the Solid state relay module 2-channel (G3MB-202P)?
Solid state relay SSR-40DA and Relay module 2-channel 5 V.
