Components / Sensors / NTC 10 kΩ waterproof probe

NTC 10 kΩ waterproof probe

10 kΩ thermistor sealed in a steel tip with a cable.

MeasuresTemperature
RangeAbout −20 to 105 °C
InterfaceAnalog divider
Supply voltageAny
SensorsReviewedMPN NTC 10K probeUsed in 6 projects
NTC10
In short

What is the NTC 10 kΩ waterproof probe and what is it used for?

10 kΩ thermistor sealed in a steel tip with a cable. Makers use it for water and liquid temperature.

How it works

A 10 kΩ NTC thermistor potted in a metal tube.

Key specifications

Sensor specValue
MeasuresTemperature
RangeAbout −20 to 105 °C
InterfaceAnalog divider
Supply voltageAny

Pinout

Wire 1Either wire (no polarity)
Wire 2Either wire

How to use it

Wire it as a divider with a 10 kΩ resistor and use the Beta value given by the seller (often 3950). Long cables add a little resistance; for metre-long leads it is negligible at 10 kΩ.

Applications

Alternatives

Buy at

Common questions

What is the NTC 10 kΩ waterproof probe used for?

In maker projects: water and liquid temperature.

How does the NTC 10 kΩ waterproof probe work?

A 10 kΩ NTC thermistor potted in a metal tube.

What voltage does the NTC 10 kΩ waterproof probe need?

Any.

How do I connect the NTC 10 kΩ waterproof probe to an Arduino or ESP32?

Analog divider. Pins: Wire 1 (Either wire (no polarity)), Wire 2 (Either wire).

What can I use instead of the NTC 10 kΩ waterproof probe?

DS18B20 waterproof probe.