Idea
In short
How do you build a fridge thermometer?
A waterproof probe in the fridge shows temperature and records the minimum and maximum, with a beep if it gets warm. Indicative only, not a food-safety device. You need Arduino Nano, NTC 10 kΩ waterproof probe, Resistor 10 kΩ, SSD1306 OLED Display, Passive buzzer and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Watch a fridge temperature.
Parts list
- Development Boards
- Sensors
- Passives
- Displays
- Motors & Actuators
- Prototyping
How to build it
- Build the divider
- Convert to temperature
- Show current, min and max
- Set a warm alarm
- Compare with a thermometer
Common questions
What parts do I need for the fridge thermometer?
Arduino Nano, NTC 10 kΩ waterproof probe, Resistor 10 kΩ, SSD1306 OLED Display, Passive buzzer and Breadboard 830 Tie Points.
How long does the fridge thermometer take to build?
About 150 minutes for a beginner maker.
