Projects / Ideas / Precision reference thermometer

Precision reference thermometer

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a precision reference thermometer?

A TMP117 gives about 0.1 degree accuracy without calibration, so it can check your cheaper sensors against ice water and body temperature. You need Raspberry Pi Pico H, TMP117 precision temperature sensor, 1.54 inch e-paper display, DS18B20 waterproof probe and NTC 10 kΩ waterproof probe.

Level
Intermediate
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use a high-accuracy digital sensor as a reference and compare others against it.

How to build it

  1. Read the TMP117 over I2C
  2. Put all three sensors in ice water and warm water
  3. Record the error of each
  4. Show the corrected values on the e-paper
  5. Write down the offsets for later projects

Related projects

Common questions

What parts do I need for the precision reference thermometer?

Raspberry Pi Pico H, TMP117 precision temperature sensor, 1.54 inch e-paper display, DS18B20 waterproof probe and NTC 10 kΩ waterproof probe.

How long does the precision reference thermometer take to build?

About 150 minutes for a intermediate maker.