NTC 10 kΩ waterproof probe
10 kΩ thermistor sealed in a steel tip with a cable.
MeasuresTemperature
RangeAbout −20 to 105 °C
InterfaceAnalog divider
Supply voltageAny
SensorsReviewedMPN NTC 10K probeUsed in 6 projects
In short
What is the NTC 10 kΩ waterproof probe and what is it used for?
10 kΩ thermistor sealed in a steel tip with a cable. Makers use it for water and liquid temperature.
How it works
A 10 kΩ NTC thermistor potted in a metal tube.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Temperature |
| Range | About −20 to 105 °C |
| Interface | Analog divider |
| Supply voltage | Any |
Pinout
Wire 1Either wire (no polarity)
Wire 2Either wire
How to use it
Wire it as a divider with a 10 kΩ resistor and use the Beta value given by the seller (often 3950). Long cables add a little resistance; for metre-long leads it is negligible at 10 kΩ.
Applications
Water and liquid temperature
Builds that use it
Alternatives
- DS18B20 waterproof probeDigital probe, several on one pin
Common questions
What is the NTC 10 kΩ waterproof probe used for?
In maker projects: water and liquid temperature.
How does the NTC 10 kΩ waterproof probe work?
A 10 kΩ NTC thermistor potted in a metal tube.
What voltage does the NTC 10 kΩ waterproof probe need?
Any.
How do I connect the NTC 10 kΩ waterproof probe to an Arduino or ESP32?
Analog divider. Pins: Wire 1 (Either wire (no polarity)), Wire 2 (Either wire).
What can I use instead of the NTC 10 kΩ waterproof probe?
DS18B20 waterproof probe.
