Idea
In short
How do you build a DIY RC transmitter?
Joysticks, switches and an ESP32 make a two-way radio transmitter with a battery meter. You need ESP32 DevKit V1, Joystick module (dual axis) × 2, Tactile push button 6 mm × 4, SSD1306 OLED Display, nRF24L01+ Radio Module and Li-Po battery 3.7 V 2000 mAh.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a controller with telemetry.
Parts list
- Development Boards
- Sensors
- Switches
- Displays
- Wireless
- Batteries
How to build it
- Read both sticks
- Calibrate centre and ends
- Send channels over radio
- Show telemetry
- Add trims and failsafe
Common questions
What parts do I need for the DIY RC transmitter?
ESP32 DevKit V1, Joystick module (dual axis) × 2, Tactile push button 6 mm × 4, SSD1306 OLED Display, nRF24L01+ Radio Module and Li-Po battery 3.7 V 2000 mAh.
How long does the DIY RC transmitter take to build?
About 360 minutes for a advanced maker.
