Idea
In short
How do you build a mecanum-wheel robot that drives sideways?
Four mecanum wheels let a robot move sideways and diagonally, controlled by a joystick over nRF24. You need Arduino Mega 2560 R3, Mecanum wheel set (60 mm, 4 pcs), JGA25-370 encoder gear motor × 4, L298N Dual H-Bridge Module × 2, nRF24L01+ Radio Module × 2, Joystick module (dual axis) × 2, Arduino Nano and Li-Po 3S 11.1 V 2200 mAh 30C (drone).
- Level
- Advanced
- Time
- About 360 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Mix three motion axes into four wheel speeds.
Parts list
- Development Boards
- Mechanical & Hardware
- Motors & Actuators
- Motor Drivers
- Wireless
- Sensors
- Development Boards
- Batteries
How to build it
- Mount the wheels in the X pattern the kit shows
- Each wheel speed = forward ± sideways ± turn
- Read two joysticks on the remote and send them over nRF24
- Scale speeds so none goes over 100 %
- Test each motion: forward, sideways, diagonal, spin
Common questions
What parts do I need for the mecanum-wheel robot that drives sideways?
Arduino Mega 2560 R3, Mecanum wheel set (60 mm, 4 pcs), JGA25-370 encoder gear motor × 4, L298N Dual H-Bridge Module × 2, nRF24L01+ Radio Module × 2, Joystick module (dual axis) × 2, Arduino Nano and Li-Po 3S 11.1 V 2200 mAh 30C (drone).
How long does the mecanum-wheel robot that drives sideways take to build?
About 360 minutes for a advanced maker.
