Idea
In short
How do you build a pottery kiln temperature logger?
A K-type thermocouple and a MAX6675 record the temperature curve of a small hobby kiln or furnace so you can compare firings. It only logs, it never switches the heater. You need Arduino Nano, MAX6675 thermocouple module with K-type probe, MicroSD Card Module, DS3231 RTC module and 16x2 LCD with I2C backpack (PCF8574).
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read a thermocouple and keep the logger away from the hot parts.
Parts list
- Development Boards
- Sensors
- Interfaces
- Sensors
- Displays
How to build it
- Wire the MAX6675 over SPI
- Run the probe through the kiln spy hole and keep the cable clear of the hot wall
- Log a temperature every 30 seconds
- Show the live value
- Plot the firing curves in a spreadsheet
Common questions
What parts do I need for the pottery kiln temperature logger?
Arduino Nano, MAX6675 thermocouple module with K-type probe, MicroSD Card Module, DS3231 RTC module and 16x2 LCD with I2C backpack (PCF8574).
How long does the pottery kiln temperature logger take to build?
About 120 minutes for a intermediate maker.
