Projects / Ideas / Thermocouple probe for a kettle

Thermocouple probe for a kettle

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a thermocouple probe for a kettle?

A K-type probe and its converter show high temperatures up to a few hundred degrees. For learning and measuring tea or oil temperature safely at a distance, never near mains wiring. You need Arduino Nano, MAX6675 thermocouple module with K-type probe, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Read a thermocouple.

How to build it

  1. Wire the module on SPI
  2. Read the temperature
  3. Smooth the reading
  4. Show it with a trend arrow
  5. Compare with a kitchen thermometer

Related projects

Common questions

What parts do I need for the thermocouple probe for a kettle?

Arduino Nano, MAX6675 thermocouple module with K-type probe, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the thermocouple probe for a kettle take to build?

About 210 minutes for a intermediate maker.