Flex sensor 2.2 inch
Strip whose resistance rises when bent.
MeasuresBend
RangeAbout 25 kΩ flat to about 100 kΩ bent
InterfaceAnalog divider
SensorsReviewedMPN FS-L-0055-253-STUsed in 5 projects
In short
What is the Flex sensor 2.2 inch and what is it used for?
Strip whose resistance rises when bent. Makers use it for data gloves.
How it works
Conductive ink on a plastic strip cracks open slightly when bent, increasing its resistance.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Bend |
| Range | About 25 kΩ flat to about 100 kΩ bent |
| Interface | Analog divider |
Pinout
Lead 1Either end
Lead 2Either end
How to use it
Put it in a divider with a 47 kΩ resistor and read the middle with the ADC. Bend it only in the direction printed on the strip, and support the base where it is crimped, which is the weak point.
Applications
Data gloves
Builds that use it
Alternatives
- Force sensitive resistor FSR 402Senses pressing instead of bending
Common questions
What is the Flex sensor 2.2 inch used for?
In maker projects: data gloves.
How does the Flex sensor 2.2 inch work?
Conductive ink on a plastic strip cracks open slightly when bent, increasing its resistance.
How do I connect the Flex sensor 2.2 inch to an Arduino or ESP32?
Analog divider. Pins: Lead 1 (Either end), Lead 2 (Either end).
What can I use instead of the Flex sensor 2.2 inch?
Force sensitive resistor FSR 402.
