Components / Sensors / Force sensitive resistor FSR 402

Force sensitive resistor FSR 402

Round pad whose resistance drops when pressed.

MeasuresForce (roughly)
RangeAbout 0.2 to 20 N
InterfaceAnalog divider
Watch out forGood for detecting presses, not for weighing
SensorsReviewedMPN FSR 402Used in 10 projects
FSR402
In short

What is the Force sensitive resistor FSR 402 and what is it used for?

Round pad whose resistance drops when pressed. Makers use it for pressure pads, touch strength.

How it works

Pressing squeezes conductive particles together in a polymer film, lowering its resistance.

Key specifications

Sensor specValue
MeasuresForce (roughly)
RangeAbout 0.2 to 20 N
InterfaceAnalog divider
Watch out forGood for detecting presses, not for weighing

Pinout

Lead 1Either lead
Lead 2Either lead

How to use it

Use a divider with a 10 kΩ resistor. Resistance falls from over 1 MΩ to a few hundred ohms as you press harder. It shows how hard something is pressed, but drifts too much for weighing.

Applications

Alternatives

Buy at

Common questions

What is the Force sensitive resistor FSR 402 used for?

In maker projects: pressure pads, touch strength.

How does the Force sensitive resistor FSR 402 work?

Pressing squeezes conductive particles together in a polymer film, lowering its resistance.

How do I connect the Force sensitive resistor FSR 402 to an Arduino or ESP32?

Analog divider. Pins: Lead 1 (Either lead), Lead 2 (Either lead).

What can I use instead of the Force sensitive resistor FSR 402?

Load cell 5 kg (bar type).