Projects / Ideas / Finger bend glove

Finger bend glove

IntermediateWearablesIdeaReviewed
In short

How do you build a finger bend glove?

Flex sensors in a glove show how far each finger bends and drive a bar graph. You need Arduino Nano, Flex sensor 2.2 inch × 2, Resistor 10 kΩ × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Read several flex sensors.

Parts list

How to build it

  1. Make a voltage divider for each sensor
  2. Read both values
  3. Calibrate flat and bent
  4. Map to a percentage
  5. Draw bars

Related projects

Common questions

What parts do I need for the finger bend glove?

Arduino Nano, Flex sensor 2.2 inch × 2, Resistor 10 kΩ × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the finger bend glove take to build?

About 210 minutes for a intermediate maker.