Projects / Ideas / Digital clock from logic chips

Digital clock from logic chips

AdvancedDigital LogicIdeaReviewed
In short

How do you build a digital clock from logic chips?

A crystal oscillator and counter chips make a working 24-hour clock with no microcontroller. You need CD4060 counter and oscillator, Crystal 32.768 kHz (watch crystal), 74HC390 dual decade counter × 3, CD4511 BCD to 7-segment decoder × 4, 7-segment display 1 digit (common cathode) × 4, 74HC08 quad AND gate, Resistor 330 Ω × 28, Breadboard 1660 points (with base) × 2 and Jumper wires male to male (40 pcs, 20 cm).

Level
Advanced
Time
About 720 min
Parts
9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Divide a crystal clock down and count hours and minutes.

How to build it

  1. Divide 32.768 kHz down to 1 Hz
  2. Count seconds to 60
  3. Count minutes and hours
  4. Reset hours at 24 with gates
  5. Add set buttons

Related projects

Common questions

What parts do I need for the digital clock from logic chips?

CD4060 counter and oscillator, Crystal 32.768 kHz (watch crystal), 74HC390 dual decade counter × 3, CD4511 BCD to 7-segment decoder × 4, 7-segment display 1 digit (common cathode) × 4, 74HC08 quad AND gate, Resistor 330 Ω × 28, Breadboard 1660 points (with base) × 2 and Jumper wires male to male (40 pcs, 20 cm).

How long does the digital clock from logic chips take to build?

About 720 minutes for a advanced maker.