Idea
In short
How do you build a gesture ring remote?
A tiny ring with an IMU recognises flicks and circles and controls slides or smart lights. You need Seeed XIAO ESP32S3, BMI160 6-axis IMU and Li-Po battery 3.7 V 500 mAh.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Recognise gestures with a small model on a tiny board.
Parts list
- Development Boards
- Sensors
- Batteries
How to build it
- Record each gesture 50 times
- Train a small model
- Run it on the board
- Send commands over BLE
- Fit it all into a 3D printed ring
Related projects
Common questions
What parts do I need for the gesture ring remote?
Seeed XIAO ESP32S3, BMI160 6-axis IMU and Li-Po battery 3.7 V 500 mAh.
How long does the gesture ring remote take to build?
About 480 minutes for a advanced maker.
