Components / Sensors / A1302 linear hall sensor

A1302 linear hall sensor

Linear Hall sensor whose output follows field strength.

MeasuresMagnetic field
InterfaceAnalog, 2.5 V at zero field
Supply voltage4.5 to 6 V
SensorsReviewedMPN A1302Used in 7 projects
A1302
In short

What is the A1302 linear hall sensor and what is it used for?

Linear Hall sensor whose output follows field strength. Makers use it for measuring magnet position.

How it works

The Hall effect produces a voltage across a current-carrying semiconductor in a magnetic field.

Key specifications

Sensor specValue
MeasuresMagnetic field
InterfaceAnalog, 2.5 V at zero field
Supply voltage4.5 to 6 V

Pinout

VCC4.5 to 6 V (left, marked face towards you)
GNDGround (middle)
VOUTOutput, about 2.5 V with no field (right)

How to use it

Read VOUT with the ADC; it changes by about 1.3 mV per gauss. Use it to measure magnet position or current in a wire looped near it.

Applications

Alternatives

Common questions

What is the A1302 linear hall sensor used for?

In maker projects: measuring magnet position.

How does the A1302 linear hall sensor work?

The Hall effect produces a voltage across a current-carrying semiconductor in a magnetic field.

What voltage does the A1302 linear hall sensor need?

4.5 to 6 V.

How do I connect the A1302 linear hall sensor to an Arduino or ESP32?

Analog, 2.5 V at zero field. Pins: VCC (4.5 to 6 V (left, marked face towards you)), GND (Ground (middle)), VOUT (Output, about 2.5 V with no field (right)).

What can I use instead of the A1302 linear hall sensor?

Hall Effect Sensor A3144.