Idea
In short
How do you build a magnet position meter?
A linear Hall sensor measures how far a magnet is, from a few millimetres to a few centimetres, and draws a curve. You need Arduino Nano, A1302 linear hall sensor, Neodymium magnets (10 × 3 mm), SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Characterise a Hall sensor.
Parts list
- Development Boards
- Sensors
- Mechanical & Hardware
- Displays
- Prototyping
How to build it
- Read the sensor
- Move the magnet in measured steps
- Record the curve
- Fit a simple table
- Show distance
Common questions
What parts do I need for the magnet position meter?
Arduino Nano, A1302 linear hall sensor, Neodymium magnets (10 × 3 mm), SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the magnet position meter take to build?
About 210 minutes for a intermediate maker.
