Idea
In short
How do you build a scooter smooth throttle?
An Arduino sits between the throttle and controller to ramp acceleration smoothly for new riders. You need Arduino Nano, A1302 linear hall sensor, MCP4725 12-bit DAC module and LM2596 Buck Module.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Filter and limit an analog control signal.
Parts list
- Development Boards
- SensorsRead the existing throttle
- Integrated Circuits
- Power
How to build it
- Read the throttle voltage
- Limit how fast it can rise
- Output the new value with the DAC
- Pass it to the controller
- Add a beginner and normal mode
Common questions
What parts do I need for the scooter smooth throttle?
Arduino Nano, A1302 linear hall sensor, MCP4725 12-bit DAC module and LM2596 Buck Module. A1302 linear hall sensor: Read the existing throttle.
How long does the scooter smooth throttle take to build?
About 180 minutes for a intermediate maker.
