7-segment display 4 digit (common cathode)
Four multiplexed red digits. Needs scanning code or a driver chip.
TypeLED 7-segment, 4 digits
Size0.56 inch
Interface12 pins (8 segments + 4 digit commons)
Supply voltageAbout 2 V per segment
DisplaysReviewedMPN 5641ASUsed in 4 projects
In short
What is the 7-segment display 4 digit (common cathode) and what is it used for?
Four multiplexed red digits. Needs scanning code or a driver chip. Makers use it for clocks, counters.
How it works
Four digits share segment lines, each with its own common cathode.
Key specifications
| Display spec | Value |
|---|---|
| Type | LED 7-segment, 4 digits |
| Size | 0.56 inch |
| Interface | 12 pins (8 segments + 4 digit commons) |
| Supply voltage | About 2 V per segment |
Pinout
11a
7b
4c
2d
1e
10f
5g
3DP
12Digit 1 common
9Digit 2 common
8Digit 3 common
6Digit 4 common
How to use it
Multiplex it: light one digit at a time fast enough that all look on. The SevSeg library handles this. Use resistors on the segment lines.
Applications
Clockscounters
Builds that use it
Alternatives
- TM1637 4-digit displayDriver built in
- 8-digit 7-segment module (MAX7219)Eight digits on three wires
Common questions
What is the 7-segment display 4 digit (common cathode) used for?
In maker projects: clocks, counters.
How does the 7-segment display 4 digit (common cathode) work?
Four digits share segment lines, each with its own common cathode.
What voltage does the 7-segment display 4 digit (common cathode) need?
About 2 V per segment.
How do I connect the 7-segment display 4 digit (common cathode) to an Arduino or ESP32?
12 pins (8 segments + 4 digit commons). Pins: 11 (a), 7 (b), 4 (c), 2 (d), 1 (e), 10 (f).
What can I use instead of the 7-segment display 4 digit (common cathode)?
TM1637 4-digit display and 8-digit 7-segment module (MAX7219).
